This car has been in my storage unit for the last 15 years. It was originally designed to be a Pro-Street Show Drag Car. The roll cage was built by Wille Rells Sr. (built Pat Musi's frames) and also fabricated a custom K member for the big block 460 with custom double A arm suspension with coil overs and rack and pinion (would also accept modern modular motor). The brakes are adapted Granada brakes. The suspension has some rust and will need to be cleaned and painted or powder coated. The car has no rear end and is on casters. The car was plastic media blasted at "Hot Rods and Custom Stuff" in Escondido, CA after the rear quarter panels and outer wheel houses were replaced at Magnolia Autobody in Santee,CA and then the whole body was sprayed in DP90 epoxy primer. There are no fenders or hood for the car. I have many photos and would prefer you to look at car on-site prior to purchasing. I also have all the receipts for body and roll cage work. Car is sold as is. I have the clean title (Oregon). The car is not complete and needs many parts to complete. A comparable Dynacorn chassis runs $18,000 and will not be a Mach I...
This is the perfect candidate for restoration, just buy a rusty donor and move all the parts over.
Car is on 6 inch caster wheels, you must bring a trailer to haul.
Expires on: 08/09/2017
Posted: 04/19/2017, ad expires in 107 days
Seller Information Ad posted by:
Member Since: 08/01/2015
Phone Number: (619) 301-5959