SONNY'S EXTREME PRO STOCK 892c.i. 5.300 b/s

EXTREME PRO STOCK 892 C.I.
2008 892 CU. IN. ENGINE WITH SONNY'S DESIGN
5.300" B.S. GM HEMISPHERICAL CYLINDER HEADS.
2100 NATURALLY ASPIRATED H.P.@ 8100 RPM 1410 FT. LBS TORQUE @ 6500RPM
Special Features:
*--Sonny's 892ci GM Hemispherical headed engine features Ultra Lite CNC program that weighs 2 lbs less than the 784 ci Hemispherical headed engines.

*--Sonny's 5.300" GM Hemispherical head has a 1.600" longer bore spacing than the 5.000" GM Hemispherical heads

*--Four Braswell 2bbl carburetors featuring 2.400" throttle bore feed pistons with 16.0:1 static colmpression

*--The cam has a gross lift of 1.200" with a 1.85 rocker arm ratio with .685 lobe liftl

*--The 5.300" cylinder head's intake runner has a volume of 652cc while the exhaust is 212cc which flow 660cfm @ 1.100" lift with a 2.725" valve on the intake and 470cfm @ 1.100" lift with a 2.100" valve on the exhaust

Sonny's in-house fully CNC ported "Next Generation" Hemi cyl. heads
SAR Special Billet Aluminum 5.300" B.S. block with 1.100" raised cam
Bryant billet crank
BME 426 aluminum forged rods
Venolia pistons
Jesel keyed lifters
1.031" tool steel taper-wall pins
Federal Mogul "Hell Fire" rings
Special titanium valves & PSI springs
SAR shaft mounted rocker system with needle bearing roller tips
Jesel belt drive
Moroso 4-stage dry sump oiling
Moroso vacuum system
ATI balancer
MSD cranktrigger ignition
SAR sheetmetal 4x2 intake with linkage
SAR/BLP (4) 2 barrel split dominator carbs
Sheetmetal billet rail valve covers
Meziere hi-flow electric water pump
Pro series CSI starter
Fuel lines with 4 port regulator

SAVE 4,800.00 ONLY 83,000.00 IF ORDERED BY 11/15/08

CALL TODD @ 509-710-6544



Seller Phone Number: 509-710-6544

This item is NEW

This item is NEW

Trades NOT ACCEPTED

Item Location: DEER PARK, WA Get Directions

This ad expires in 10 days.